AEG T7DBK841N User Manual - Page 19
Emptying the water, container, Cleaning the condenser
![]() |
View all AEG T7DBK841N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Gather lint with hand from both internal parts of the filter. ENGLISH 19 2. Pull the plastic connection out and drain the water into a basin or equivalent receptacle. Throw the lint in the dustbin. 4. If necessary, clean the filter with a vacuum cleaner. Close the filter. 5. If necessary, remove lint from the filter socket and gasket. You can use a vacuum cleaner. Place the filter back inside the filter socket. 10.2 Emptying the water container Empty the condensed water container after each drying cycle. If the condensed water container is full, the programme stops automatically. The Tank symbol comes on the display and you must empty the water container. To empty the water container: 1. Pull the water container out keeping it in a horizontal position. 3. Push the plastic connection back in and place the water container back into position. 4. To continue the programme press the Start/Pause button. 10.3 Cleaning the condenser If the symbol Condenser flashes on the display, inspect the condenser and its compartment. If it is dirty, clean it. Do the check not less than once a 6 months. WARNING! Do not touch the metal surface with bare hands. Risk of injury. Wear protective gloves. Clean carefully to avoid damaging the metal surface. To inspect: 1. Open the door. Pull the filter up.
![](/manual_guide/products/aeg-t7dbk841n-user-manual-339c1ac/19.png)