ASRock Fatal1ty X99 Professional/3.1 User Manual - Page 51
Installing Four CrossFireX, Ready Graphics Cards
View all ASRock Fatal1ty X99 Professional/3.1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Fatal1ty X99 Professional/3.1 Series 2.11.3 Installing Four CrossFireXTM-Ready Graphics Cards Step 1 Insert one graphics card into PCIE1 slot, another graphics card into PCIE2 slot, the third graphics card into PCIE4 slot and the last graphics card into PCIE5 slot. Make sure that the cards are properly seated on the slots. CrossFire Bridge Step 2 Use one CrossFireTM Bridge to connect the graphics cards on PCIE1 and PCIE2 slots, another CrossFireTM Bridge to connect the graphics cards on PCIE2 and PCIE4 slots, and use the third CrossFireTM Bridge to connect the graphics cards on PCIE4 and PCIE5 slots. (The CrossFireTM Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.) Step 3 Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE1 slot. English 43