ASRock G41M-LE User Manual - Page 8

WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the thirdparty overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking. CAUTION! 1. This motherboard supports native FSB1333/1066/800 MHz. For normal operation, you do not need to adjust the jumper settings. For special overclocking mode, please refer to page 20 for proper jumper settings. 2. 3. 4. About the setting of "Hyper Threading Technology", please check page 31. This motherboard supports Untied Overclocking Technology. Please read "Untied Overclocking Technology" on page 26 for details. This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 17 for proper installation. 5. Please check the table below for the CPU FSB frequency and its corresponding memory support frequency. CPU FSB Frequency 1333 1066 800 * * Memory Support Frequency DDR2 667, DDR2 800, DDR2 1066 DDR2 667, DDR2 800, DDR2 1066 DDR2 667, DDR2 800 533 DDR2 533 DDR2 1066 memory modules will operate in overclocking mode. If you adopt a DDR2 1066 memory module on this motherboard, you need to adjust the jumpers. Please refer to page 20 for proper 6. jumper settings. Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® XP and Windows® VistaTM. For Windows ® XP 64-bit and Windows® VistaTM 7. 64-bit with 64-bit CPU, there is no such limitation. The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check Intel ® website for the latest information. 8. Full HD 1080p Blu-ray (BD) / HD-DVD playback support requires the proper hardware configuration. Please refer to page 10 for the minimum hardware requirement and the passed Full HD 1080p Blu-ray (BD) / HD-DVD films in our lab test. 8