ASRock H510M-HDV/M.2 SE Software/BIOS Setup Guide - Page 35
ODT NOM Rd B1, ASRock Second Timing Optimization
View all ASRock H510M-HDV/M.2 SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
H510M-HDV/M.2 SE Configuration options: [Auto] [34] [40] [48] [60] [80] [120] [240] [Disabled] ODT NOM Rd (B1) Configure the memory on die termination resistors' NOM Rd. Configuration options: [Auto] [34] [40] [48] [60] [80] [120] [240] [Disabled] ODT PARK (A1) Configure the memory on die termination resistors' PARK. Configuration options: [Auto] [34] [40] [48] [60] [80] [120] [240] [Disabled] ODT PARK (B1) Configure the memory on die termination resistors' PARK. Configuration options: [Auto] [34] [40] [48] [60] [80] [120] [240] [Disabled] Advanced Setting ASRock Timing Optimization Enable/Disable ASRock Timing Optimization. When enabled, the memory timing will use ASRock optimized value. Configuration options: [Enabled] [Disabled] ASRock Second Timing Optimization Enable/Disable ASRock Second Timing Optimization. When enabled, the second memory timing will use ASRock optimized value. Configuration options: [Enabled] [Disabled] Memory Training Mode Configure Training Memory with legacy Cometlake setting. Configuration options: [Auto] [Cometlake Mode] Realtime Memory Timing Enable/Disable realtime memory timings. When enabled, the system will allow performing realtime memory changes after MRC_DONE. Configuration options: [Enabled] [Disabled] Reset for MRC Failed Reset system after MRC training is failed. 31