ASRock H510M-HDV/M.2 SE Software/BIOS Setup Guide - Page 45

IGPU Multi-Monitor, Onboard LAN, Onboard HD Audio, Front Panel, Deep Sleep, Restore on AC/Power Loss

Page 45 highlights

H510M-HDV/M.2 SE processor when the system boots up. Configuration options: [Auto] [32M] [64M] [128M] [256M] [512M] [1024M] Options vary depending on the memory you use on your motherboard. IGPU Multi-Monitor Select [Disabled] to disable the integrated graphics when an external graphics card is installed. Select [Enabled] to keep the integrated graphics enabled at all times. Configuration options: [Auto] [Enabled] [Disabled] Onboard LAN Allows you to enable or disable Onboard LAN. Configuration options: [Enabled] [Disabled] Onboard HD Audio Allows you to enable or disable the onboard HD audio controller. Set this item to [Auto] to enable the onboard HD and automatically disable it when a sound card is installed. Configuration options: [Auto] [Enabled] [Disabled] Front Panel Allows you to select Front Panel type. [HD] sets the front panel audio connector mode to high definition audio. [AC 97] sets the front panel audio connector mode to legacy AC'97.] Onboard HDMI HD Audio Allows you to enable or disable audio for the onboard digital outputs. This item appears when you've installed a graphics card on your motherboard. Configuration options: [Enabled] [Disabled]. Deep Sleep Allows you to configure deep sleep mode for power saving when the computer is shut down. We recommend disabling Deep Sleep for better system compatibility and stability. Configuration options: [Enabled] [Enabled in S5] [Enabled in S4-S5] Restore on AC/Power Loss Allows you to select the power state after a power failure. [Power Off] sets the power to remain off when the power recovers. [Power On] sets the system to start to boot up when the power recovers. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

41
H510M-HDV/M.2 SE
processor when the system boots up.
Configuration options: [Auto] [32M] [64M] [128M] [256M] [512M] [1024M]
Options vary depending on the memory you use on your motherboard.
IGPU Multi-Monitor
Select [Disabled] to disable the integrated graphics when an external graphics card is
installed. Select [Enabled] to keep the integrated graphics enabled at all times.
Configuration options: [Auto] [Enabled] [Disabled]
Onboard LAN
Allows you to enable or disable Onboard LAN.
Configuration options: [Enabled] [Disabled]
Onboard HD Audio
Allows you to enable or disable the onboard HD audio controller. Set this item to [Auto] to
enable the onboard HD and automatically disable it when a sound card is installed.
Configuration options: [Auto] [Enabled] [Disabled]
Front Panel
Allows you to select Front Panel type.
[HD] sets the front panel audio connector mode to high definition audio.
[AC 97] sets the front panel audio connector mode to legacy AC’97.]
Onboard HDMI HD Audio
Allows you to enable or disable audio for the onboard digital outputs.
°is item appears when you've installed a graphics card on your motherboard.
Configuration options: [Enabled] [Disabled].
Deep Sleep
Allows you to configure deep sleep mode for power saving when the computer is shut
down. We recommend disabling Deep Sleep for better system compatibility and stability.
Configuration options: [Enabled] [Enabled in S5] [Enabled in S4-S5]
Restore on AC/Power Loss
Allows you to select the power state aſter a power failure.
[Power Off] sets the power to remain off when the power recovers.
[Power On] sets the system to start to boot up when the power recovers.