ASRock K8SLI-eSATA2 User Manual - Page 42
IDE Configuration, IDE Configuration
View all ASRock K8SLI-eSATA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3.3.4 IDE Configuration BIOS SETUP UTILITY Advanced IDE Configuration Serial ATA Controller SATA Operation Mode eSATAII Support Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave [Enabled] [RAID] [Enabled] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Disabled Enabled +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Serial ATA Controller Enable the SATA controller by selecting [Enabled]. The default value of this option is [Enabled]. Configuration options: [Enabled] and [Disabled]. SATA Operation Mode Use this item to adjust SATA Operation Mode. The default value of this option is [RAID]. Configuration options: [RAID], [non-RAID] and [AHCI]. eSATAII Support Use this item to enable or disable eSATAII support. The default value of this option is [Enabled]. Configuration options: [Enabled], [Disabled]. IDE Device Configuration You may set the IDE configuration for the device that you specify. We will use the "Primary IDE Master" as the example in the following instruction, which can be applied to the configurations of "Primary IDE Slave", "Secondary IDE Master", and "Secondary IDE Slave" as well. 42