ASRock Z170M Extreme4 User Manual - Page 37
Step 3, Step 4, Step 5, Step 6
View all ASRock Z170M Extreme4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Z170M Extreme4 5 4 3 2 E D C B A E D C B A Step 3 Move the standof based on the module type and length. he standof is placed at the nut location C by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standof by hand. Step 4 Peel of the yellow protective ilm on the nut to be used. Hand tighten the standof into the desired nut location on the motherboard. Step 5 Align and gently insert the M.2 (NGFF) SSD module into the M.2 slot. Please be aware that the M.2 (NGFF) SSD module only its in one orientation. E D NUT2 NUT1 Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. English 31
31
English
Z170M Extreme4
3
2
4
5
Step 3
Move the standoµ based on the
module type and length.
He standoµ is placed at the nut
location C by default. Skip Step 3 and
4
and go straight to Step
5
if you are
going to use the default nut.
Otherwise, release the standoµ by
hand.
B
C
D
E
A
Step 4
Peel oµ the yellow protective ±lm on
the nut to be used. ³and tighten the
standoµ into the desired nut location
on the motherboard.
A
B
C
D
E
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot.
Please be aware that the M.2
(NGFF) SSD module only ±ts in one
orientation.
NUT1
NUT2
D
E
Step 6
Tighten the screw with a screwdriver
to secure the module into place.
Please do not overtighten the screw as
this might damage the module.