Aastra DT433 User Guide DT4x3 for BusinessPhone - Page 26
IMPORTANT, Charging Rack, Battery Pack Charger, Clips, Security Cord, Leather Casing
View all Aastra DT433 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
User Manual Cordless Phones for BusinessPhone™ There are two desk chargers available; one basic that only charges the handset, and one with advanced functionality to download new software and to synchronize parameters. The handset is fully operational while placed in the charger. The charger is delivered with a plug-in power supply and is connected into an ordinary wall socket. For more information, see the advanced charger's Installation and Operation Manual. IMPORTANT: When charging the EX classified handset, it is only permitted to use a charger marked with DC3-BxxB or DC4-BxxB?on the label. Note: Only use the charger within the temperature range of +5° C - +40° C. 3.2.2 Charging Rack The Rack PDM Charger is used for charging several handsets, to synchronize parameters, and for software download. IMPORTANT: If using the Rack PDM charger for charging EX classified handsets, it is only permitted to use a rack charger marked with 87L00008AAAon the label. The built in power supply can charge up to six handsets. See the Charging Rack's Installation and Operation Manual. 3.2.3 Battery Pack Charger The Battery Pack Charger is used for charging up to six spare batteries. IMPORTANT: It is not permitted to charge EX classified batteries using the battery pack charger. See the battery pack charger's Installation Guide. 3.2.4 Clips Tip: It is possible to use the handset without any clip on, see 14.5 Attach Cover for No Clip on page 80. The belt clips cannot be used if the handset shall be placed in a case. See 3.2.6 Leather Casing on page 20 for more information. There are two belt clips available: • Hinge-type clip? ?To prevent the handset from slipping out of for example pocket or belt, see 14.3 Attach the Hinge-type Clip on page 79. • Swivel-type clip To be able to rotate without slipping out from for example pocket or belt, see 14.4 Attach the Swivel-type Clip on page 79. 3.2.5 Security Cord The security cord is 800 mm long. The security cord is attached directly to the handset. 3.2.6 Leather Casing The leather casing is especially designed for the handset. The casing comes with a swivel type belt clip and the handset is fully operational while placed in the casing. . AMT/PUD/TR/0119/1/2/EN 2012-08-13 20