Aastra DT433 User Guide - Cordless Phones for MX-ONE - Page 71
IMPORTANT, System, Change System, Subscribe Handset in IP -DECT System using Easy Registration,
View all Aastra DT433 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
User Manual Cordless Phones for MX-ONE™ 1 Enter the menu by pressing "Menu". 2 Select in the menu. 3 Select "Headset". 4 Select the corresponding headset type from list, that is, "Mic on boom", or "Hearing protection". Additional headsets13 might be visible in the list. 5 Press "Select". Tip: It is possible to configure the headset button with a specific function, such as post-dial, dial last called number, or dial a predefined number. See the handset's Configuration Manual for more information. Note: When Bluetooth is disabled and having an active call in loudspeaker mode on an intrinsically safe handset, the audio will not be transferred to the headset when connecting it. IMPORTANT: The headset Microphone on a boom is not available as accessory for the intrinsically classified handset. If used, it is NOT permitted to use the headset in hazardous areas. 13.9.3 System The handset can subscribe up to eight different systems. Change System Select "Automatic" or a specific system. If the handset is set to "Automatic", it selects a system according to the priority list, see Priority on page 67. Subscribe Handset in IP -DECT System using Easy Registration A handset can subscribe to an IP-DECT system automatically if the following are fulfilled: • The IP-DECT system is configured for Easy Registration, see Installation and Operation Manual, IP-DECT Base Station . • The handset's extension number and IPEI are registered in the IP-DECT system, see the corresponding manual for the IP-DECT system. • The handset is not subscribed to any systems. The handset software is version 3.5.6 or greater. 1 If needed, switch off the handset by pressing . 2 Switch on the handset by pressing . 3 Select language to be used or press "Cancel". If Cancel is pressed, the default language English is used. 4 The handset starts to search for IP-DECT systems and subscribes to the system when it is found. NOTE: If no system is found within 2 minutes or "Cancel" is pressed, the handset's subscription menu is displayed. Continue with step 5 in chapter Subscribe Handset in DECT System Manually for more information. Subscribe handset in DECT System Manually To subscribe a system, the "Park:" (Portable Access Right Key) and "Ac:" (Authentication code) related to the system are needed. Contact the system administrator for more information. 13.Only visible if a headset profile has been configured in the PDM. 1424-EN/LZT 103 089 B 2014-04-13 65