Acer Altos G300 Acer Altos G300 User's Guide - Page 61
Introduction - ram
![]() |
View all Acer Altos G300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
49 Introduction Most systems are already configured by the manufacturer or the dealer. There is no need to run Setup when starting the computer unless you get a Run Setup message. The Setup program loads configuration values into the battery-backed nonvolatile memory called CMOS RAM. This memory area is not part of the system RAM. Note: If you repeatedly receive Run Setup messages, the battery may be bad. In this case, the system cannot retain configuration values in CMOS. Ask a qualified technician for assistance. Before you run Setup, make sure that you have saved all open files. The system reboots immediately after you exit Setup.
![](/manual_guide/products/acer-computers-altos-g300-acer-altos-g300-users-guide-55bfec3/61.png)
49
Introduction
Most systems are already configured by the manufacturer or the
dealer.
There is no need to run Setup when starting the computer
unless you get a Run Setup message.
The Setup program loads configuration values into the battery-backed
nonvolatile memory called CMOS RAM.
This memory area is not part
of the system RAM.
Note:
If you repeatedly receive Run Setup messages, the battery
may be bad.
In this case, the system cannot retain configuration
values in CMOS.
Ask a qualified technician for assistance.
Before you run Setup, make sure that you have saved all open files.
The system reboots immediately after you exit Setup.