Acer Altos G701 Acer Altos G701 User's Guide - Page 42
Post-installation instructions, previously removed.
View all Acer Altos G701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
32 3 Upgrading the system 3 Open the system according to the instructions on page 33. 4 Follow the ESD precautions described in this section when handling a server component. 5 Remove any expansion board(s) or peripheral(s) that block access to the DIMM socket or other component connector. See the following sections for specific installation instructions on the component you want to install. Warning! Failure to properly turn off the server before you start installing components may cause serious damage. Do not attempt the procedures described in the following sections unless you are a qualified service technician. Post-installation instructions Observe the following after installing a server component: 1 See to it that all components are installed according to the described step-by-step instructions. 2 Reinstall any expansion board(s) or peripheral(s) that you have previously removed. 3 Reinstall the air baffle. 4 Reinstall the chassis panels. 5 Connect the necessary cables. 6 Turn on the system.