Acer Altos G701 Acer Altos G701 User's Guide - Page 60
Installing an expansion card
View all Acer Altos G701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
50 3 Upgrading the system Installing an expansion card This section explains how to install an expansion card. The onboard expansion slots supports PCI (Peripheral Component Interconnect) cards. Note: The illustrations used in this section shows the Altos G701 server chassis. To install an expansion card 1 Observe the ESD precautions and pre-installation procedures described on page 31. 2 Locate an empty expansion slot on the mainboard. 3 Press the slot release latch outward (1). 4 Open the side cover of the slot (2). 5 Pull out the card bracket (3). 6 Remove the expansion card from its protective packaging. 7 Align the card in the empty bracket. Make sure that the card is properly seated.
3 Upgrading the system
50
Installing an expansion card
This section explains how to install an expansion card.
The onboard
expansion slots supports PCI (Peripheral Component Interconnect)
cards.
Note:
The illustrations used in this section shows the Altos G701
server chassis.
To install an expansion card
1
Observe the ESD precautions and pre-installation procedures
described on page 31.
2
Locate an empty expansion slot on the mainboard.
3
Press the slot release latch outward
(1)
.
4
Open the side cover of the slot
(2)
.
5
Pull out the card bracket
(3)
.
6
Remove the expansion card from its protective packaging.
7
Align the card in the empty bracket.
Make sure that the card is
properly seated.