Acer Altos G701 Acer Altos G701 User's Guide - Page 50
Installing the hot-swappable cage, Refer to Mainboard layout on for the location of
View all Acer Altos G701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
40 3 Upgrading the system Installing the hot-swappable cage 1 Detach the chassis panels and remove the air baffle. 2 Connect the following cables to the SCSI backplane board: a SCSI cable b SCSI drive power cable c SCSI drive fault LED cable 3 Attach the other end of these cables to the corresponding connectors on the mainboard. Refer to "Mainboard layout" on page 10 for the location of the connectors. 4 Insert the hot-swappable cage into the housing (2), then tighten the four thumbscrews to secure it to the chassis (1). 5 Reinstall the air baffle and the chassis panels.
3 Upgrading the system
40
Installing the hot-swappable cage
1
Detach the chassis panels and remove the air baffle.
2
Connect the following cables to the SCSI backplane board:
a
SCSI cable
b
SCSI drive power cable
c
SCSI drive fault LED cable
3
Attach the other end of these cables to the corresponding
connectors on the mainboard.
Refer to “Mainboard layout” on page 10 for the location of the
connectors.
4
Insert the hot-swappable cage into the housing
(2)
, then tighten
the four thumbscrews to secure it to the chassis
(1)
.
5
Reinstall the air baffle and the chassis panels.