Acer Altos G701 Acer Altos G701 User's Guide - Page 54
Installing a 5.25-inch storage device (optional), before pulling it out from the chassis
View all Acer Altos G701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
44 3 Upgrading the system Installing a 5.25-inch storage device (optional) Note: If you are installing a new drive in an empty drive bay, skip steps 2 to 4. 1 Observe the ESD precautions and pre-installation procedures described on page 31. 2 Disconnect the power and IDE cables from the old drive. 3 Press the release bracket on both sides of the drive carrier (1) before pulling it out from the chassis (2). 4 Remove the eight screws that hold the old drive to the drive carrier then pull it out.
3 Upgrading the system
44
Installing a 5.25-inch storage device (optional)
Note:
If you are installing a new drive in an empty drive bay, skip
steps 2 to 4.
1
Observe the ESD precautions and pre-installation procedures
described on page 31.
2
Disconnect the power and IDE cables from the old drive.
3
Press the release bracket on both sides of the drive carrier
(1)
before pulling it out from the chassis
(2)
.
4
Remove the eight screws that hold the old drive to the drive
carrier then pull it out.