Acer Altos R701 Altos R700 Chassis Subassembly - Page 31
Remove the Fan module, retention stub.
View all Acer Altos R701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
23 3 Discard the protective blocks. Remove the Fan module 1 Lift the processor duct out of the chassis. 2 If it is installed, remove the 100-pin flex circuit. 3 At the end of the fan module closest to the chassis centerline, push on the tab to release it from the chassis (A). 4 While pushing on the tab, lift up on the module to clear the retention stub. 5 Slide the module towards the power supply until it comes free.
23
3
Discard the protective blocks.
Remove the Fan module
1
Lift the processor duct out of the chassis.
2
If it is installed, remove the 100-pin flex circuit.
3
At the end of the fan module closest to the chassis centerline, push
on the tab to release it from the chassis (A).
4
While pushing on the tab, lift up on the module to clear the
retention stub.
5
Slide the module towards the power supply until it comes free.