Acer Altos R701 Altos R700 Chassis Subassembly - Page 37
Install the Fan module, Align the holes in the fan module with the raised tabs on
View all Acer Altos R701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
29 2 Connect the main server board power cable to the white 24-pin connector on the server board. Firmly press the two connectors together until they are fully seated. Install the Fan module Caution: When installing the fan module, avoid pinching cables routed in the area. 1 Note the raised tabs on the chassis floor and the corresponding holes in the bottom of the fan module. 2 Lower the fan module until it is just above the chassis floor. 3 Align the holes in the fan module with the raised tabs on the chassis and lower the fan module onto the floor.
29
2
Connect the main server board power cable to the white 24-pin
connector on the server board. Firmly press the two connectors
together until they are fully seated.
Install the Fan module
Caution
: When installing the fan module, avoid pinching cables
routed in the area.
1
Note the raised tabs on the chassis floor and the corresponding
holes in the bottom of the fan module.
2
Lower the fan module until it is just above the chassis floor.
3
Align the holes in the fan module with the raised tabs on the
chassis and lower the fan module onto the floor.