Acer Altos R701 Altos R700 Chassis Subassembly - Page 32

Install the Server Board, Remove the server board from its packaging and antistatic bag.

Get Acer Altos R701 PDF manuals and user guides View all Acer Altos R701 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

24 6 Lift the fan module out of the chassis. 2 Assembling the System Install the Server Board Caution: Do not install any server board support bumpers in the Altos R700 chassis. System components must be installed in the order presented below. If installed in a different order, component damage may occur. 1 Ensure that the insulator sheet is seated securely over the standoffs, is laying flat on the chassis floor, and that the edge of the sheet is seated below the studs in the rear chassis wall. 2 Remove the server board from its packaging and antistatic bag. 3 While placing the board on the chassis standoffs, carefully position the board I/O connectors in the rear chassis I/O openings. 4 Adjust board position so that the mounting holes rest securely on the corresponding shouldered standoffs.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
2 Assembling the System
24
6
Lift the fan module out of the chassis.
Install the Server Board
Caution
:
Do not install any server board support bumpers in the Altos R700
chassis.
System components must be installed in the order presented
below. If installed in a different order, component damage may
occur.
1
Ensure that the insulator sheet is seated securely over the
standoffs, is laying flat on the chassis floor, and that the edge of
the sheet is seated below the studs in the rear chassis wall.
2
Remove the server board from its packaging and antistatic bag.
3
While placing the board on the chassis standoffs, carefully position
the board I/O connectors in the rear chassis I/O openings.
4
Adjust board position so that the mounting holes rest securely on
the corresponding shouldered standoffs.