Acer Altos R720 Altos R720 User's Guide - Page 70
Installing a tape drive
View all Acer Altos R720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
60 3 System upgrade 6 Install an empty hot-plug HDD carrier or a filler panel into the HDD bay. If installing a new FDD, see "To install a FDD in a converted HDD bay" section on page 56 for instructions. Caution! The filler panel must be installed to maintain proper system cooling. Installing a tape drive To install a tape drive into the server, make sure you have the following items: • Tape drive kit • 3.5-inch half-height tape drive To purchase a tape drive kit, contact your local Acer representative. Caution! Before installing a tape drive into the server, make sure the sixth hot-plug HDD or the sixth drive board is not installed on the backplane board. To install a tape drive 1 Observe the ESD precautions and pre-installation instructions described on page 35. 2 Using a long screwdriver push the tape drive filler panel out from the inside of the chassis.