Acer Altos R720 Altos R720 User's Guide - Page 98
To install the SAS mid-plane board, and insert the mid-plane into the backplane
View all Acer Altos R720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
88 3 System upgrade To install the SAS mid-plane board 1 Observe the ESD precautions and pre-installation instructions described on page 35. 2 Remove the air baffles. See "To remove the small air baffle" section on page 48. 3 Position the mid-plane board over the retention clips (A). 4 Slide it forward (B) and insert the mid-plane into the backplane connector (C). 5 Connect the cables to the mid-plane board. 6 Observe the post-installation instructions described on page 36.
3 System upgrade
88
To install the SAS mid-plane board
1
Observe the ESD precautions and pre-installation instructions
described on page 35.
2
Remove the air baffles. See “To remove the small air baffle”
section on page 48.
3
Position the mid-plane board over the retention clips
(A)
.
4
Slide it forward
(B)
and insert the mid-plane into the backplane
connector
(C)
.
5
Connect the cables to the mid-plane board.
6
Observe the post-installation instructions described on page 36.