Acer Altos R720 Altos R720 User's Guide - Page 94
Removing and installing an ARMC/3 module
View all Acer Altos R720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
84 3 System upgrade Removing and installing an ARMC/3 module The optional ARMC/3 module provides server management firmware and functionality to the system. To remove an ARMC/3 module: 1 Observe the ESD precautions and pre-installation instructions described on page 35. 2 Remove the CPU air duct. Perform the instructions described in "To remove the CPU air duct" section on page 42. 3 Remove the NIC module. a Pull up the module to remove it from the connector. b Remove the three standoffs from the mainboard, then keep the standoffs for later NIC module installation. 4 Hold the module both by the finger grip loop and by the opposite corner (A). Caution: Do not bend or twist the module.
3 System upgrade
84
Removing and installing an ARMC/3
module
The optional ARMC/3 module provides server management firmware
and functionality to the system.
To remove an ARMC/3 module:
1
Observe the ESD precautions and pre-installation instructions
described on page 35.
2
Remove the CPU air duct. Perform the instructions described in “To
remove the CPU air duct” section on page 42.
3
Remove the NIC module.
a
Pull up the module to remove it from the connector.
b
Remove the three standoffs from the mainboard, then keep
the standoffs for later NIC module installation.
4
Hold the module both by the finger grip loop and by the opposite
corner
(A)
.
Caution:
Do not bend or twist the module.