Acer Aspire 3810T Acer Aspire 3810T and Aspire 3810TZ Serivce Guide - Page 27
Restore - bios
View all Acer Aspire 3810T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
NOTE: Create a factory default image when you want to burn a bootable disc that contains your computer's entire operating system as it was delivered to you from the factory. If you wish to have a disc that will allow you to browse the contents and install selected drivers and applications, create a drivers and application backup instead - this disc will not be bootable. Restore The restore feature allows you to restore or recover the system from a factory default image or from previously created CD and DVD backups. You can also reinstall applications and drivers for your Acer system. 1. Click on Start, All Programs, Acer, Acer eRecovery Management. 2. Switch to the Restore page by clicking Restore. 3. You can choose to restore the system from a factory default image or reinstall applications and drivers. 4. Follow the instructions on screen to complete the process. Restore Windows Vista from backup discs To restore Windows Vista from your previously burned backup discs, you will need to insert the first backup disc and enable the F12 Boot Menu via the BIOS Setup Utility. 1. Turn on your computer and insert the first system recovery disc into the optical disc drive. Restart your computer. 2. During startup when the Acer logo shows, press the F2 key to enter BIOS Setup, where you can set system parameters. 3. Use the left and right arrow keys to select the Main submenu. 4. Use the up and down arrow keys to select F12 Boot Menu. 5. Use the F5 or F6 key to change F12 Boot Menu to Enabled. 6. Press the ESC key to enter the Exit submenu, press the ENTER key to Exit Saving Changes. Press the ENTER key again to select Yes. The system will reboot. 7. After rebooting, when the Acer logo shows, press the F12 key to open the Boot Menu. Here you can select which device to boot from. 8. Use the arrow keys to select the IDE CD, then press the ENTER key. Windows will be installed from the recovery disc. 9. Insert the second recovery disc when prompted, then follow the onscreen prompts to complete the restore. Chapter 1 21