Acer Aspire 3810T Acer Aspire 3810T and Aspire 3810TZ Serivce Guide - Page 71
Run BIOS Setup Utility to recon system
View all Acer Aspire 3810T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Error Messages System battery is dead - Replace and run Setup System CMOS checksum bad - Default configuration used System timer error Real time clock error Previous boot incomplete - Default configuration used Memory size found by POST differed from CMOS Diskette drive A error Incorrect Drive A type - run SETUP System cache error - Cache disabled CPU ID: DMA Test Failed Software NMI Failed Fail-Safe Timer NMI Failed Device Address Conflict Allocation Error for device Failing Bits: nnnn Fixed Disk n FRU/Action in Sequence Replace RTC battery and Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Run "Load Default Settings" in BIOS Setup Utility. RTC battery System board Run "Load Default Settings" in BIOS Setup Utility. DIMM System board Check the drive is defined with the proper diskette type in BIOS Setup Utility See "External Diskette Drive Check" on page 60. Check the drive is defined with the proper diskette type in BIOS Setup Utility System board System board DIMM System board DIMM System board DIMM System board Run "Load Default Settings" in BIOS Setup Utility. RTC battery System board Run "Load Default Settings" in BIOS Setup Utility. RTC battery System board DIMM BIOS ROM System board None Chapter 4 65