Acer Aspire 9500 Aspire 9500 User's Guide - Page 68
Setting passwords, Enter, Important
View all Acer Aspire 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
English 58 • Type the Supervisor Password and press to access the BIOS utility. If you enter the password incorrectly, a warning message appears. Try again and press . • When the User Password is set and the password on boot parameter is enabled, a prompt appears at boot-up. • Type the User Password and press to use the computer. If you enter the password incorrectly, a warning message appears. Try again and press . Important! You have three chances to enter a password. If you fail to enter the password correctly after three tries, the system halts. Press and hold the power button for four seconds to shut down the computer. Then turn on the computer again, and try again. Setting passwords You can set passwords using the BIOS utility.
58
English
•
Type the Supervisor Password and press <
Enter
> to access the BIOS utility.
If you enter the password incorrectly, a warning message appears. Try
again and press <
Enter
>.
•
When the User Password is set and the password on boot parameter is
enabled, a prompt appears at boot-up.
•
Type the User Password and press <
Enter
> to use the computer. If you
enter the password incorrectly, a warning message appears. Try again and
press <
Enter
>.
Important!
You have three chances to enter a password. If you fail
to enter the password correctly after three tries, the system halts.
Press and hold the power button for four seconds to shut down
the computer. Then turn on the computer again, and try again.
Setting passwords
You can set passwords using the BIOS utility.