Acer GT7700-UQ9550A User Manual - Page 75
To install a new hard drive to an empty carrier
View all Acer GT7700-UQ9550A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
English 63 5 If you are replacing a hard disk, remove the four screws that secure the hard disk to the carrier (1), then remove the disk from the carrier (2). 6 Keep the screws for later installation. To install a new hard drive to an empty carrier: 1 Perform steps 1 through 5 of the previous section. 2 Remove the four screws. Save the screws for later use. 3 Remove the new HDD from its protective packaging. 4 Install the new hard disk into the HDD carrier. Secure it with the four screws you removed. 5 Install the new hard drive into the drive bay. a Slide the drive into the bay with the carrier handle still extended.
63
English
5
If you are replacing a hard disk, remove the four screws that secure the hard disk to
the carrier
(1)
, then remove the disk from the carrier
(2)
.
6
Keep the screws for later installation.
To install a new hard drive to an empty carrier:
1
Perform steps 1 through 5 of the previous section.
2
Remove the four screws. Save the screws for later use.
3
Remove the new HDD from its protective packaging.
4
Install the new hard disk into the HDD carrier. Secure it with the four screws you
removed.
5
Install the new hard drive into the drive bay.
a
Slide the drive into the bay with the carrier handle still extended.