Acer GT7700-UQ9550A User Manual - Page 81
note of it., inserted it incorrectly. Reverse the orientation of the module and insert
View all Acer GT7700-UQ9550A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
English 69 5 Align the DIMM so that the notch on the slot fits the keyed edge of the module, then press the module at both ends to seat it fully into the slot (1). If you insert a DIMM but it does not fit easily into the slot, you have inserted it incorrectly. Reverse the orientation of the module and insert it again. 6 Firmly press the holding clips inward to lock the DIMM in place (2). If the holding clips do not close, the DIMM is not properly inserted. 7 Observe the post-installation instructions described on page 57. The system automatically detects the amount of memory installed. Run the BIOS setup to view the new value for total system memory and make a note of it.
69
English
5
Align the DIMM so that the notch on the slot fits the keyed edge of the module, then
press the module at both ends to seat it fully into the slot
(1)
.
If you insert a DIMM but it does not fit easily into the slot, you have
inserted it incorrectly. Reverse the orientation of the module and insert it
again.
6
Firmly press the holding clips inward to lock the DIMM in place
(2)
.
If the holding clips do not close, the DIMM is not properly inserted.
7
Observe the post-installation instructions described on page 57.
The system automatically detects the amount of memory installed. Run the
BIOS setup to view the new value for total system memory and make a
note of it.