Acer R5250-Q2000 Configuration Guide - Page 120
Device, Version, Directory on EasyBUILD, Software, Enter, sda: Floppy, Installation Setting, C/C++
UPC - 750519188644
View all Acer R5250-Q2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Drivers Required For SUSE Linux Enterprise Server 10 Installation, the following device drivers are required. Device Version Directory on EasyBUILD SAS Daughter Board 4.00.13.04-1 \Disk\r5250\sas\sas1068\sles10\ Onboard NVIDIA N/A NFP3600 Chipset OS built-in Onboard NVIDIA 0.62 nForce Networking Controller \Disk\R5250\nic\Nvidia\sles10\ Onboard XGI Z9s 1.12.03 \Disk\r5250\onboard\xgiz9s\sles10\ ATI FireGL V5200 8.35.5 \Disk\R5250\graphic\V5200\sles10\ Software Required The management utility for SAS daughter board can be found in the EasyBUILD 8.0 build 100 (or later). Software Version Directory on EasyBUILD MegaRAID Storage 2.30 Manager \app\R5250\sas\lsi1068\Linux\ Configuring SAS Daughter Board Please refer to the Appendix B. for the SAS Daughter Board Configuration. Installation Tips 1. Since SUSE Linux Enterprise Server 10 cannot recognize the SAS daughter board controller, you need to make a driver diskette from the EasyBUILD 8.0 build 100 first before the installation. 2. Boot the system form SUSE Linux Enterprise Server 10 disk1 bootable CD. 3. When you see the boot menu on the screen, press F5 and select Yes. 4. Press Enter to continue the installation. 5. Insert the driver disk to the floppy, select sda: Floppy and OK to load the SAS daughter board driver from the driver diskette. 6. After loading the driver, select OK and Back to return to the installation. 7. If you have installed the ATI FireGL V5200 in the system, you need to install addition packages during the OS installation. If you are using onboard XGI Z9s, please go to step 13 directly. 8. At Installation Setting, select the Software. 9. Check C/C++ Compiler and Tools under Development to add C/C++ compiler tools. Altos R5250 Installation Configuration Guide 104