Acer R5250-Q2000 Configuration Guide - Page 34

VGA Driver Installation (ATI FireGL V5600) Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter Board) ATI FireGL v5600 Driver Installation section. RAID Utility Installation Please refer to the Windows Server 2008 Enterprise x64 Edition (SAS Daughter Board) RAID Utility Installation section. Network Utility Installation The ForceWare Network Access Manager is included in the chipset driver package. The ForceWare Network Access Manager will be installed automatically when you installing the chipset driver package. Windows Server 2008 Enterprise Edition Installation (SAS Daughter Board) Below information describes how to manually install Windows Server 2008 Enterprise Edition on Altos R5250 with SAS daughter board. BIOS Required Altos R5250 BIOS P06 (or later) is required to support Windows Server 2008. Drivers Required For Windows Server 2008 Installation, the following device drivers are required. Device Version EasyBUILD Version SAS Daughter Board 1.26.05.00 EasyBUILD 8.0 build 200 (or later) Chipset Package 9.26 EasyBUILD 8.0 build 200 (or later) Onboard Gigabit Ethernet 67.80.0.0 EasyBUILD 8.0 build 200 (or later) Onboard VGA 6.14.10.1090 EasyBUILD 8.0 build 200 (or later) ATI FireGL V5600 8.440.0.0 EasyBUILD 8.0 build 200 (or later) Software Required The management utility for SAS daughter board and NIC can be found in the EasyBUILD 8.0 build 200 (or later). Software Version Directory on EasyBUILD MegaRAID Storage Manager 2.63 EasyBUILD 8.0 build 200 (or later) ForceWare Network Access Manager 67.80.0.0 EasyBUILD 8.0 build 200 (or later) Configuring SAS Daughter Board Please refer to the Appendix B. for the SAS daughter board configuration. Altos R5250 Installation Configuration Guide 18