Acer TravelMate P6 Lifecycle Extension Guide - Page 35
LCD Panel & eDP Cable Removal
View all Acer TravelMate P6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2. Pry slightly to access the double-sided mounting tape (A) underneath the LCD panel (B). Then pull to detach the double-sided mounting tape from the LCD cover. Repeat the same procedure to remove the double-sided mounting tape on another side of the LCD panel (Figure 1-44). WEEE Annex VII Component: LCD Panel B A Figure 1-44. LCD Panel & eDP Cable Removal 3. Carefully turn the LCD panel over so that the display panel is facing down on a flat surface. Then detach the mylar tape (C) securing the eDP cable to the LCD panel (Figure 1-45). C Figure 1-45. LCD Panel & eDP Cable Removal Disassembly Procedures 1-33
Disassembly Procedures
1-33
2.
Pry slightly to access the double-sided mounting tape (A) underneath the LCD panel
(B). Then pull to detach the double-sided mounting tape from the LCD cover. Repeat
the same procedure to remove the double-sided mounting tape on another side of
the LCD panel (
Figure 1-44
).
Figure 1-44.
LCD Panel & eDP Cable Removal
3.
Carefully turn the LCD panel over so that the display panel is facing down on a flat
surface. Then detach the mylar tape (C) securing the eDP cable to the LCD panel
(
Figure 1-45
).
Figure 1-45.
LCD Panel & eDP Cable Removal
A
B
WEEE Annex VII Component:
LCD Panel
C