Acer XR341CK User Manual

Acer XR341CK Manual

Acer XR341CK manual content summary:

  • Acer XR341CK | User Manual - Page 1
    Acer LCD Monitor User Guide
  • Acer XR341CK | User Manual - Page 2
    . Acer Incorporated. All Rights Reserved. Acer LCD Monitor User Guide Original Issue: 4/2015 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual
  • Acer XR341CK | User Manual - Page 3
    carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during
  • Acer XR341CK | User Manual - Page 4
    power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not increase it after your ears have adjusted. • Limit
  • Acer XR341CK | User Manual - Page 5
    power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length. Product servicing Do not attempt to service this product yourself
  • Acer XR341CK | User Manual - Page 6
    death. Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio equipment in acer-group.com/public/Sustainability/sustainability01.htm Visit www.acer-group.com for further information on the features and benefits of our other products. Disposal instructions
  • Acer XR341CK | User Manual - Page 7
    English LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled
  • Acer XR341CK | User Manual - Page 8
    English • stand up and walk around regularly to remove the strain on your leg muscles Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your
  • Acer XR341CK | User Manual - Page 9
    English XR341CK XR341CK xxxxxx; Apr.10,2015 ix
  • Acer XR341CK | User Manual - Page 10
    America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
  • Acer XR341CK | User Manual - Page 11
    iv Product servicing v Potentially explosive environments vi Additional safety information vi IT Equipment Recycling Information vi Disposal instructions vi LCD 8 Panel controls 8 Using the Shortcut Menu 10 The Function page 12 Troubleshooting 19 HDMI/DP Mode (Optional) 19
  • Acer XR341CK | User Manual - Page 12
  • Acer XR341CK | User Manual - Page 13
    unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide MHL Cable (Optional) XR341CK DP Cable (Optional) HDMI cable (Optional) AC Power cord USB cable (Optional) AC Adapter 1
  • Acer XR341CK | User Manual - Page 14
    English SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the height/tilt of the monitor. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 1 2 130mm • Tilt Please see the illustration below for an
  • Acer XR341CK | User Manual - Page 15
    an AC outlet. • For units using 120 V AC: Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V. • For units using 220/240 V AC: Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set should have the appropriate safety approvals for the country in which the
  • Acer XR341CK | User Manual - Page 16
    protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports the DDC2B standard. 20-pin color display signal cable PIN No. Description 1 ML_Lane 0+ 3 ML_Lane 0- 5 GND
  • Acer XR341CK | User Manual - Page 17
    English 19-pin color display signal cable 1917151311 9 7 5 3 1 18161412 10 8 6 4 2 PIN No. Description 1 TMDS Data2+ 3 TMDS Data2- 5 TMDS Data1 Shield 7 TMDS Data0+ 9 TMDS Data0- 11 TMDS Clock Shield 13 CEC 15 SCL 17 DDC/CEC Ground  )PU1MVH%FUFDU PIN No. Description 2 TMDS
  • Acer XR341CK | User Manual - Page 18
    16 17 18 19 VGA VGA SVGA SVGA SVGA XGA XGA XGA XGA XGA SXGA WXGA WXGA WXGA+ WSXGA+ UXGA WUXGA UHD UHD VESA MODES Resolution 640x480 60Hz 640x480 72Hz 800x600 56Hz 800x600 60Hz 800x600 72Hz 1024x768 60Hz 1024x768 70Hz 1152x864 75Hz 1280x960 60Hz 1280x720 60Hz 1280x1024 60Hz
  • Acer XR341CK | User Manual - Page 19
    English Installation 1. Turn off your computer and unplug your computer's power cord. 2. Connect the signal cable to the HDMI (optional) and /or DP (optional) and /or MHL (optional) input socket of the monitor, and the HDMI (optional) and /or DP (optional) and /or MHL (optional) output socket of
  • Acer XR341CK | User Manual - Page 20
    function in the Function Menu.Press this key to enter Function Menu a. Press to view Function Menu.Press again to activate the Overdrive function and set it to either Normal or Extreme mode. b. When the OSD menu is active, this button will act as the exit key (exit OSD menu). c. Press
  • Acer XR341CK | User Manual - Page 21
    (DP/Mini-DP only): It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update. DTS Sound: For DTS patents, see http://patents.dts.com. Manufactured
  • Acer XR341CK | User Manual - Page 22
    Menu Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and
  • Acer XR341CK | User Manual - Page 23
    OFF/ ON), and select which user-defined profile to use (please see the OSD section for more information). Adjusting the OD setting Open the OD control and select your preferred OD setting using the arrows. When you are done, use to go back one level. Adjusting the volume Open the Volume control
  • Acer XR341CK | User Manual - Page 24
    adjust the sliding scales. 4. The Picture menu can be used to adjust the Acer eColor, Brightness, Contrast, Black Level, Blue Light, ACM and Super Sharpness. 5. If the image is very bright or has few shadow areas, adjusting this setting may not result in any noticeable changes to the image. 8. Blue
  • Acer XR341CK | User Manual - Page 25
    English lower value. 9. ACM: Turn ACM on or off. The default is off. 10. Super Sharpness:Turn the sharpness On or Off. Sharpness technology can simulate high-resolution images by boosting the pixel density of the original source to make images sharper and clearer.
  • Acer XR341CK | User Manual - Page 26
    Using the ▲/▼ keys, select Color from the OSD. Then navigate to the picture element you wish to adjust. 3. Use the ◄/► keys to select the setting. 4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard value for Windows). 5. Color temperature: Default is warm. You
  • Acer XR341CK | User Manual - Page 27
    change. 3. Use the ◄/► keys to adjust any sliding scales. 4. Language: Set the OSD menu language. 5. OSD timeout: Adjust the delay before turning off the OSD menu. 6. Refresh rate num: Display the panel's current refresh rate on the screen. 7. Transparency: Select the transparency when using gaming
  • Acer XR341CK | User Manual - Page 28
    Using the ▲/▼ keys, select Setting from the OSD. Then navigate to the setting you wish to adjust. 4. Use the ◄/► keys to select the setting. 5. Input: Select the source sonic flow. 8. DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format. 9. Daisy Chain: Daisy Chain: Default is
  • Acer XR341CK | User Manual - Page 29
    . Wide mode: You can select which screen aspect you are using. The options are Full, Aspect, and 1:1. 14. DDC/CI: Allows the monitor settings to be set through the software on the PC. 15. Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent
  • Acer XR341CK | User Manual - Page 30
    Product information 1. Press the MENU key to open the OSD. 2. Using the ▲/▼ keys, select Information to view the basic information for your monitor and current input. 18
  • Acer XR341CK | User Manual - Page 31
    monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. HDMI/DP Mode (Optional) Problem No picture visible LED status Blue Off Remedy Using the OSD menu, adjust brightness and contrast to maximum or reset to their default settings. Check
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Acer LCD Monitor
User Guide