Adaptec 1684800 User Guide - Page 8

Dos Installer 5 DOS Installer The DOS Installer program is on the EZ-SCSI DOS drivers disk. Use the DOS installer to install host adapter and CD-ROM drivers. Installing EZ-SCSI Deluxe in DOS 1 Start your computer in DOS. 2 Insert the SOYO CD. 3 At the DOS prompt, change to your CD-ROM driver (typically d: or e:). 4 Type :\drivers\EZ-SCSI\dosinst and then press . A message appears, asking you to wait while EZ-SCSI is initializing. 5 When the first screen of the DOS Installer appears, press to configure your system using the default setup. 6 In the next screen, press to continue the installation. 7 The next screen lists all host adapter cards that were found. Press . 8 The next screen displays all SCSI devices that were found. Press . 9 The next screen shows that EZ-SCSI will copy drivers and utilities into c:\SCSI. a. To accept the default directory, press . b. To change the default directory, follow the instructions on the screen and then press . 10 If you enter a screen that req2ests mscdex.exe, then continue to Step 11. Otherwise, go to Step 12. 11 Insert the disk containing the mscdex.exe file, type the path in the command line, and then press . Note: mscdex.exe is required for accessing your CD-ROM drive. If you can't find this file, please see Microsoft MS-DOS CD-ROM Extensions. 12 In the next screen, enter the CD-ROM drive letter or accept the default letter. 13 Re-insert the Adaptec EZ-SCSI DOS drivers disk, and then press . 14 The next screen displays entries to be copied to config.sys. Press to make all modifications. 5-1