Adaptec 2005S User Guide - Page 155
Configuring SNMP Support on Windows, Yes, install SNMP support, Services, SNMP Service, Traps
View all Adaptec 2005S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Appendix A: Configuring SNMP Support ● 154 Configuring SNMP Support on Windows Note: Be sure your Windows installation includes SNMP support. By default, Windows 2000 and Windows XP do not install SNMP. To install and configure SNMP support: 1 Run the Adaptec Storage Manager installation program (see page 25). 2 When prompted, select Yes, install SNMP support. 3 Follow the on-screen instructions to complete the installation, then restart your computer. 4 Open the Windows Computer Management tool, then select Services from the tree. 5 Double-click SNMP Service. The SNMP Service Properties window opens. 6 Click the Traps tab, then enter the IP address of each computer on which you want to enable traps. 7 Click OK. 8 Start the SNMP service.
Appendix A: Configuring SNMP Support
●
154
Configuring SNMP Support on Windows
Note:
Be sure your Windows installation includes SNMP support. By
default, Windows 2000 and Windows XP do not install SNMP.
To install and configure SNMP support:
1
Run the Adaptec Storage Manager installation program (see
page 25
).
2
When prompted, select
Yes, install SNMP support
.
3
Follow the on-screen instructions to complete the installation, then
restart your computer.
4
Open the Windows Computer Management tool, then select
Services
from the tree.
5
Double-click
SNMP Service
.
The SNMP Service Properties window opens.
6
Click the
Traps
tab, then enter the IP address of each computer on
which you want to enable traps.
7
Click
OK
.
8
Start the SNMP service.