Adaptec 2005S User Guide - Page 51
Partitioning and Formatting Your Logical Drives, Modify logical devices, Apply
![]() |
View all Adaptec 2005S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Step 4: Building Your Storage Space ● 50 To specify a size for the logical drives, or to make other changes to the configuration, click Modify logical devices. See Step 6 on page 53 for more information. Note: Some operating systems have size limitations for logical drives. Before you save the configuration, verify that the size of the logical drive is appropriate for your operating system. 5 Click Apply, then click Yes. Adaptec Storage Manager builds the logical drive(s). The configuration is saved on the Adaptec controller and on the physical drives. 6 Repeat Steps 1 to 5 for each controller on your system. 7 Continue with Partitioning and Formatting Your Logical Drives below. Partitioning and Formatting Your Logical Drives The logical drives you create appear as physical disk drives on your operating system. You must partition and format these logical drives before you can use them to store data. Note: Logical drives that have not been partitioned and formatted cannot be used to store data. Refer to your operating system documentation for more information.
![](/manual_guide/products/adaptec-2130slp-user-guide-80fc7e9/51.png)