Adaptec 2110S User Guide - Page 41
Stripe Size, The stripe size is the amount of data written to one drive before
UPC - 760884138830
View all Adaptec 2110S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Creating an Array 2 Change the following properties: Property Array tab Stripe Size RAID 5 Creation By Cache tab Write Cache Description Sets the amount of data written to one array partition before the controller moves to the next array partition in a stripe set (RAID 0), RAID 5 set, stripe set of mirror sets (RAID 0/1), or stripe set of RAID 5 sets (RAID 0/5). See Stripe Size on page 2-11. (RAID 5 only) Shows the method used to created the array. Some controllers let you change the RAID 5 creation method. When you create a RAID 5 set, Storage Manager Pro uses the Verify method by default when it creates the array. The Verify method reads all the data on the drives in the array and resets the parity (redundancy) of the existing data sequentially from the beginning of the array to the end. The array is available to users during the Verify process. Enables or disables write cache. See Write Cache Settings on page 2-12. 3 Click Save to save the changes and return to the Create Array dialog box. Storage Manager Pro saves your changes, which are associated with your user account. Storage Manager Pro uses these settings whenever you use your user account to create an array. Stripe Size The stripe size is the amount of data written to one drive before the controller moves to the next drive in a stripe set (RAID 0), RAID 5 set, stripe set of mirror sets (RAID 0/1), or stripe set of RAID 5 sets (RAID 0/5). 2-11