Adaptec 39160 User Reference - Page 22
Configuring the Adaptec SCSI Card 39160 with SCSISelect, Select
UPC - 760884155240
View all Adaptec 39160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Adaptec SCSI Card 39160 User's Reference Configuring the Adaptec SCSI Card 39160 with SCSISelect SCSISelect, which is included with the Adaptec SCSI Card 39160, enables you to change SCSI settings without opening the computer or handling the card. SCSISelect also enables you to low-level format or verify the disk media of your SCSI hard disk drives. The following table lists the available and default settings for each SCSISelect option. The settings marked as "Auto-sync" are automatically synchronized for both SCSI channels-for example, if you change the Boot Channel option to B First on Channel A, the change will apply to Channel B as well. All other options can be set separately for each of the two SCSI channels. The default settings are appropriate for most systems and should not be changed. Run SCSISelect if you need to change or view current settings, or if you need to use the SCSI disk utilities. See the descriptions of each option, starting on page 19. SCSISelect Options Available Settings Default Setting SCSI Bus Interface Definitions: Host Adapter SCSI ID 0-15 7 SCSI Parity Checking Enabled Disabled Enabled Host Adapter SCSI Termination: Ch. A Automatic Automatic Low On/High On Low Off/High Off Low Off/High On Ch. B Automatic, Automatic Enabled, Disabled Boot Device Options: Boot Channel [Auto-sync] A First, B First A First Boot SCSI ID [Auto-sync] 0-15 0 Boot LUN Number1 [Auto-sync] 0-7 0 16