Adaptec 39160 User Reference - Page 23
Configuring the Adaptec SCSI Card 39160 with SCSISelect, Select, SCSI Device Configuration - enable bios
UPC - 760884155240
View all Adaptec 39160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Configuring the Adaptec SCSI Card 39160 with SCSISelect SCSISelect Options Available Settings Default Setting SCSI Device Configuration: Sync Transfer Rate (MBytes/sec) 160, 80.0, 53.4, 40.0, 160 32.0, 26.8, 20.0, 16.0, 13.4, 10.0, ASYN Initiate Wide Negotiation Yes, No Yes (Enabled) Enable Disconnection Yes, No Yes (Enabled) Send Start Unit Command Enable Write Back Cache 2 BIOS Multiple LUN Support 2 Include in BIOS Scan 2 Yes, No Yes (Enabled) Yes, No, N/C (No N/C (No Change) Change) Yes, No No (Disabled) Yes, No Yes (Enabled) Advanced Configuration Options: Reset SCSI Bus at IC Initialization Enabled, Disabled Enabled Display Messages during Enabled, Disabled Enabled BIOS Initialization [Auto-sync] Extended BIOS Translation for DOS Drives > 1 GByte Enabled, Disabled Enabled Verbose/Silent Mode [Auto-sync] Verbose, Silent Verbose Host Adapter BIOS [Auto-sync] Domain Validation 2 [Auto-sync] Enabled Enabled Disabled: Scan Bus Disabled: Not Scan Enabled, Disabled Enabled Support Removable Disks Under BIOS as Fixed Disks 2 BIOS Support for Bootable CD-ROM 2 BIOS Support for Int 13 Extensions 2 Disabled, Boot Only, All Disks Enabled, Disabled Enabled, Disabled Disabled Enabled Enabled 1 Setting is valid only if Multiple LUN Support is enabled. 2 Settings are valid only if host adapter BIOS is enabled. 17