Adaptec 5325301508 Instruction Manual - Page 3
Press firmly to until the card snaps into place, indicating that it is seated, Install the SCSI card.
View all Adaptec 5325301508 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Snap Server 4400 Snap Server® 4400 SCSI Card 2 Using your thumb, slide the metal protective plate off as shown in the illustration. Put the protective plate in a safe place so you can use it to cover the hole if you ever permanently remove the SCSI card. 3 Install the SCSI card. Press firmly to until the card snaps into place, indicating that it is seated properly in its slot. Avoid contact with metal surfaces on the card. Grasp or press the edges only. Back of server 4 Pull the release lever back into place to secure the card. Field Service Documentation 3 Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Overland Storage or any of its subsidiaries.