Adaptec 5325301508 Instruction Manual - Page 4
Replacing the Cover, Slide the front edge of the cover all the way forward until it snaps into place. - scsi card
![]() |
View all Adaptec 5325301508 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Snap Server® 4400 SCSI Card Snap Server 4400 Replacing the Cover 1 Lower the top cover onto the server so the front edge of the cover is about 1 inch from the edge of the bezel. Caution Be sure to replace the top cover. Do not operate the server without the top cover in place. 2 Slide the front edge of the cover all the way forward until it snaps into place. Restoring Power to the Server 1 If you disconnected the Ethernet cable(s), reattach them to the server. 2 Connect the power cord. 3 Press the power button on the front of the server. Power button 4 Field Service Documentation Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does not represent a commitment on the part of Overland Storage or any of its subsidiaries.
![](/manual_guide/products/adaptec-5325301508-instruction-manual-752a203/4.png)