Adaptec ACS 100 User Guide - Page 10
Connecting and Powering On, Next Steps - driver windows 7
![]() |
UPC - 760884148273
View all Adaptec ACS 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting and Powering On Note: Windows 98SE users only-You must install the device drivers before connecting and powering on the USB Enclosure. To connect the cables and power on: 1 Use the included USB cable to connect the enclosure to an available USB port on your computer. 2 Use the included power adapter to connect the enclosure to a grounded power supply. 3 Power on the enclosure by pushing the on/off switch on the back of the enclosure to the I position. The LED on the front of the enclosure illuminates. Note: The LED flashes when there's activity on the disk drive. You have successfully installed and connected your Adaptec ACS-100 USB Enclosure. Next Steps If you have installed a new disk drive in your enclosure, you must prepare it for use by initializing and formatting it, so that your computer can recognize and communicate with it. ! Caution: If you've used the disk drive previously and want to preserve the data on it, do not initialize and format the disk drive or you'll erase all the data on it. Refer to your operating system documentation for more information. The process of initializing and formatting a new disk drive differs by operating system. Refer to your operating system documentation for instructions on completing these tasks. Note: For technical assistance with the initialization and formatting process, please contact Microsoft (Windows users) or Apple (Macintosh users). 9
![](/manual_guide/products/adaptec-acs-100-user-guide-acafa58/10.png)