Airlink AR660W3G User Manual - Page 41
Advanced Settings
UPC - 658729081659
View all Airlink AR660W3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Parameters Delete Delete All Enable MAC Control MAC Address Comment Add Clear Reset Description If you want to delete a specific MAC address entry, check the 'select' box of the MAC address you want to delete, then click 'Delete' button. (You can select more than one MAC addresses). If you want to delete all MAC addresses listed here, please click 'Delete All' button. Check/Uncheck to enable/disable wireless MAC control. Input the MAC address of your wireless devices here, format 'xx:xx:xx:xx:xx:xx'. You can input any text here as the comment of this MAC address, like 'ROOM 2A Computer' or anything. Click "Add" button to add the MAC address and associated comment to the MAC address filtering table. Click "Clear" to remove the value you inputted in MAC address and comment field. You can also click 'Reset' button to unselect all. After you finish with all settings, please click "Apply" button. If you want to reset all settings in this page, please click "Cancel" button. After you clicked Apply, the following message will be displayed on your web browser: You can click "Continue" to back to previous setup page to continue on other setup procedures, or click "Apply" to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting). 3.2.4 Advanced Settings You can set advanced wireless LAN parameters of this router. The parameters include Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Preamble Type, etc. It is suggested not to change these parameters unless you know what effect the changes will have on this router. 42