Airlink AR660W3G User Manual - Page 59

Comment Add Reset Current MAC Filtering Table Delete Selected Delete All Reset You can input any text here as the comment of this MAC address, like 'ROOM 2A Computer'. Click "Add" button to add the MAC address and associated comment to the MAC address filtering table. Remove all inputted values. From the table, you can check each MAC Address filter setting. If you want to delete a specific MAC address entry, check the 'select' box of the MAC address you want to delete, then click 'Delete' button. (You can select more than one MAC addresses). If you want to delete all MAC addresses listed here, please click 'Delete All' button. You can also click 'Reset' button to unselect all. 3.4.1.2 IP Filtering If you want to restrict users from accessing certain Internet applications/services (e.g. Internet websites, email, FTP etc.) by their IP addresses, then you can set up the filtering rules here. Entries in this table are restricted to use certain type of connections from the router. IP filters can be helpful in securing or restricting your local network. Parameters Enable IP Filtering Add PC Delete Delete All Description Please select "Deny" or "Allow" to decide the behavior of IP filtering table. If you select deny, all IP addresses listed in filtering table will be denied from connecting to the network; if you select allow, only IP addresses listed in filtering table will be able to connect to the network, and rejecting all other network devices. Click "Add PC" to add a new IP address to IP filtering table. See more information below. If you want to delete a specific setting, check the 'select' box of the setting you want to delete, then click 'Delete Selected' button. (You can select more than one setting). If you want to delete all settings listed here, please click 'Delete All' button. 60