Alcatel OS6400-24 User Guide - Page 65
Next Steps, Attaching the Switch to the Rack
View all Alcatel OS6400-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Mounting OS6400 Switches Rack-Mount Installation 5 Once the holes are aligned, insert a rack mount screw (not provided) through the bottom hole of each flange. Tighten both screws until they are secure. Attaching the Switch to the Rack Note. Be sure to install the screws in the bottom hole of each flange, as shown, before proceeding. 6 Once the screws at the bottom of each flange are secure, install the remaining rack mount screw. Be sure that all screws are securely tightened. Next Steps Rack Mounting Power Supplies Detailed information on rack mounting power supplies is provided on page 3-8. Powering On the Switch To power on the chassis refer to "Connecting Chassis to Power Source" on page 3-19. Stacking Multiple Switches Into a Virtual On the Switch To stack multiple switches into a virtual chassis, refer to "Setting Up a Stacked Configuration" on page 3-10. OmniSwitch 6400 Series Hardware Users Guide April 2011 page 3-9