Alpine 9825 Owners Manual - Page 19

On handling Compact Discs (CD/CD-R/ CD-RW) • Do not touch the surface. • Do not expose the disc to direct sunlight. • Do not affix stickers or labels and do not write on the surface. • Clean the disc when it is dusty. • Make sure that there are no bumps around the disc. • Do not use commercially available disc accessories. Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. To customers using CD-R/CD-RW • If a CD-R/CD-RW cannot be played back, make sure close session (finalization) has been performed. • Finalize the CD-R/CD-RW if necessary, and attempt playback again. Music Sensor (Skip) 1 Momentarily press the g button once during CD play to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track. Press the f button once to advance to the beginning of the next track. If you wish to access the beginning of a track further ahead, press repeatedly until the desired track is reached. NOTE The music sensor feature is functional in the play or pause mode. Fast Forward and Backward 1 Press and hold the g or f button to quickly move backward or forward until you reach the desired section of the track. Repeat Play 1 Press the 4 ( ) button to play back repeatedly the track being played. The track will be played repeatedly. Press the 4 ( ) button again and select OFF to deactivate the repeat play. NOTES • If a CD Changer is connected and the Repeat ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected. If REPEAT is set to ON during M.I.X. play, M.I.X. will apply to the current disc only. → RPT → RPT (Repeat All) → (off) • In case a 6-disc CD changer is connected: In CD changer mode, press the "F/SETUP" button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds. • In case a 12-disc CD changer is connected: In CD changer mode, press the "F/SETUP" button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds. M.I.X. (Random Play) 1 Press the 5 ( ) button in the play or pause mode. The tracks on the disc will be played back in a random sequence. To cancel M.I.X. play, press the 5 ( ) button again to turn off the M.I.X. NOTES • If a CD Changer equipped with the All M.I.X. function is connected, All M.I.X. will also be selectable. In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence. If M.I.X. is set to ON during REPEAT ALL play, M.I.X. will apply to the current disc only. → M.I.X. → M.I.X. → (off) (ALL M.I.X.) • In case a 6-disc CD changer is connected: In CD changer mode, press the "F/SETUP" button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds. • In case a 12-disc CD changer is connected: In CD changer mode, press the "F/SETUP" button to illuminate the underlined portion of the FUNC indicator, and go to step 1 within 5 seconds. • A disc that contains more than 40 tracks may not be correctly played back with the M.I.X. function. 17-EN