Alpine 9825 Owners Manual - Page 26
MobileHub™ Link Operation, Optional - cda instruction manual
UPC - 793276711052
View all Alpine 9825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
MobileHub™ Link Operation(Optional) SOURCE/ POWER BAND/ -/J 8 TEL. Rotary encoder g f 9 F/SETUP SEARCH Preset buttons (1 through 6) • An outgoing call from a portable telephone is also possible. However, you cannot perform different operations at the same time from a portable telephone and CDA-9827/CDA-9825 as malfunction can result. • With a Junction BOX connected outgoing, incoming, and sending history will also be recorded in the portable telephone. • While telephoning, DEFEAT is also set to ON. When the call has finished, the unit returns to the setting which you previously set. • The telephone volume can be adjusted from the CDA-9827/ CDA-9825. The volume you set during the call is memorized, and is automatically applied again on the next call. • While telephoning or receiving incoming calls, press the DISP/TITLE button to indicate the Network Operator display for 5 seconds. About MobileHub™ Link Connect a separately sold Junction Box and a portable telephone (available from Nokia) to control the incoming and outgoing calls of the portable telephone. CAUTION • Even with hands-free operation, a driver can be distracted during telephone operation or receiving a call. For the sake of safety, drivers are requested to refrain from operating the telephone while driving. • For the sake of safety, operations other than incoming calls and Speed-Dial outgoing calls cannot be used. NOTES • If a portable telephone is connected, its address book, incoming and outgoing history are downloaded to the Junction Box. • Please refer to the instruction manual of the Junction BOX. Telephone Mode ON/OFF 1 Press and hold the BAND/TEL. button for at least 2 seconds to turn ON Telephone mode. To turn OFF, press the BAND/TEL. button. See relevant pages for each item. NOTES • When a portable telephone is not connected, press and hold the BAND/TEL. button for at least 2 seconds. "NO PHONE" is displayed for about 2 seconds, then the mode returns to the original source mode • When the portable telephone is taken off the Junction BOX during an incoming or outgoing call, or during a hands-free call, the call will be treated as an ordinary one by the portable telephone. • When there is an incoming call while the power of CDA-9827/ CDA-9825 is OFF, the power of CDA-9827/CDA-9825 will turn ON automatically for a hands-free call. • Even if the power of the portable telephone is OFF, when CDA-9827/CDA-9825 is set to the telephone mode, the power of the portable telephone will be turned ON. • Even if the ACC power of the vehicle is turned OFF (even if the engine is stopped) during a hands-free call, the call is not disconnected, and an ordinary call by the portable telephone is possible. • If there is an incoming call during operation (except an outgoing call or talking), operation mode will end and switch to the incoming or talking mode. Incoming Calls 1 Press the :/J button to receive an incoming call. 2 Press the BAND/TEL. button to finish a call. The telephone mode will end and return to the original source mode. NOTES • When the Automatic Calling mode is on, you can talk after 3 seconds of receiving the incoming call. • The incoming call can be switched to Automatic Calling or Manual Calling. 1. Press and hold the F/SETUP button for at least 3 seconds. 2. Select the TEL mode by pressing the g or f button. 3. Press the BAND/TEL. button to change to TEL AUTO or TEL MANU. 4. Press the F/SETUP button to return to normal mode. • Press the BAND/TEL. button during an incoming call to disconnect it. 24-EN