Alpine CDA-118M Om Cda-118m English - Page 46

Specifications FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7-107.9 MHz (MODE1) 87.50-108.00 MHz (MODE2) 9.3 dBf (0.8µV/75 ohms) 13.5 dBf (1.3µV/75 ohms) 80 dB 65 dB 35 dB 2.0 dB AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) 530-1,710 kHz (MODE1) 531-1,602 kHz (MODE2) 22.5 µV/27 dB CD PLAYER SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation 5-20,000 Hz (±1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) USB SECTION USB requirements USB 1.1/2.0 Max. Power Consumption 500mA USB Class Mass Storage File System FAT 12/16/32 MP3 Decoding MPEG-1/2 AUDIO Layer-3 WMA Decoding Windows Media™ Audio AAC Decoding AAC-LC format ".m4a" file Number of Channels 2-Channel (Stereo) Frequency Response* 5-20,000 Hz (±1 dB) Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio >105 dB Channel Separation 85 dB (at 1 kHz) * Frequency response may differ depending on the encoder software/bit rate. PICKUP Wave length Laser power 795 nm CLASS I GENERAL Power Requirement 14.4 V DC (11-16 V allowable) Power Output 18 W RMS × 4* *Primary amplifier ratings per CEA-2006 Standard • Power output: measured at 4 Ohms and 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 2 V/10 k ohms Bass ±14 dB at 100 Hz Treble ±14 dB at 10 kHz Weight 2.0 kg (4 lbs. 6 oz) CHASSIS SIZE Width Height Depth 181.5 mm (7-3/16") 51.5 mm (2-1/16") 187 mm (7-3/8") NOSEPIECE SIZE Width Height Depth 200 mm (7-7/8") 92.5 mm (3-5/8") 50 mm (2") • Due to continuous product improvement, specifications and design are subject to change without notice. 44-EN