Alpine CDE-W265BT Owner's Manual (english) - Page 27

SETUP  CDE-W265BT DIM.   /SOURCE /SETUP /ENTER Rotary encoder  CDE-164BT /SETUP Rotary encoder /ENTER  6 DIM.  6 /SOURCE Setting You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can be modified. Use steps 1 to 5 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item. 1 Press and hold YSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select the desired item, and then press ENTER. AUDIO*1  GENERAL  DISPLAY  TUNER  SIRIUS XM*2  IPOD  APP  BLUETOOTH*3  AUDIO (e.g. Select GENERAL) GENERAL: CLOCK MODE CLOCK ADJ*4  PWR CLOCK  AUX SETUP  AUX NAME*5  INT MUTE  PLAY MODE  STAY ON  DEMO MODE  CLOCK MODE DISPLAY: ILLUMINATI  DIMMER  TEXTSCROLL  SCROLLTYPE  ILLUMINATI TUNER: TUNER FREQ  FM SET  TUNER FREQ IPOD: IPOD LIST APP: ALPINE APP  TTS VOLUME  ALPINE APP *1 Refer to "Sound Setting" on page 17. *2 Refer to "SiriusXM Setting" on page 45. *3 Refer to "Bluetooth SETUP" on page 31. *4 Refer to "Setting Time" on page 10. *5 Displayed only when AUX SETUP is set to ON. 3 Select an Item with the Rotary encoder, and then press ENTER. (e.g. Select AUX SETUP) 4 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select ON or OFF) 5 Press and hold YSETUP for at least 2 seconds to return to normal mode. Notes • Press t to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. General Setting GENERAL is selected on the setup main menu in step 2. Setting the Clock Display (CLOCK MODE) You can select the clock display type, 12-hour or 24-hour, depending on your preference.  Setting item: CLOCK MODE Setting contents: 12H (Initial setting) / 24H Turning the Clock Display ON/OFF  Setting item: PWR CLOCK Setting contents: OFF / ON (Initial setting) OFF: The clock isn't displayed when the power is off. ON: The clock is displayed when the power is off. Setting the AUX SETUP mode You can input the audio of an external device, (such as a Portable audio player) to the AUX connector of this unit.  Setting item: AUX SETUP Setting contents: OFF / ON (Initial setting) OFF: When set to OFF, AUX source cannot be selected. ON: Set to ON when a portable device is connected. If VSOURCE is pressed and AUX is selected, the sound of the portable device is input to the unit. 27-EN