Alpine IDAX001 Owners Manual - Page 9

Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. Press to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing again will bring the audio back to its previous level. • During MUTE, the volume display blinks. Setting the Time and Calendar 1 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP selection mode. 2 Turn the Center Jog Dial to select the General mode, and then press ENT. Bluetooth General Display iPod XM* SIRIUS* HD Radio* * Only when HD Radio / SAT Radio receiver is connected. 3 Turn the Center Jog Dial to select Clock Adjust, and then press ENT. The calendar setting mode is activated. When the year is set, proceed step 5. 4 Turn the Center Jog Dial to select year, month, day, hour or minutes to be set. 5 Press ENT. The year setting mode is activated, and the year blinks. (When "year" is set) 6 Turn the Center Jog Dial to set year, and then press ENT. The setting for year is complete. (When "year" is set) 7 Repeat steps 4 to 6 above to set month, day, hour and minutes. 8 Press and hold BACK for at least 2 seconds to return to normal mode. • Pressing BACK during the procedure will return to the previous mode. • If the Center Jog Dial is turned two steps and held, the number changes continuously. • Selecting any tuner or iPod function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. • If an HD Radio Tuner is connected, text information can be displayed. Refer to "Changing the Display (HD Radio mode only)" (page 9). • If an XM receiver is connected, the Auxiliary Data Field can be displayed. Refer to "Setting the Auxiliary Data Field Display" (page 27). • If an iPod is connected via USB, the album cover screen can be displayed. Refer to "Changing the Display" (page 12). Controllable With Remote Control Point the optional remote control transmitter at the remote control sensor. Remote control sensor Displaying the Calendar/Time Press VIEW. The calendar/time is displayed. Pressing VIEW again will return to normal mode. 7-EN