Alpine INE-W960 Owner's Manual (english) - Page 90
Slide the INE-W960/INE-NAV-60/INE-W960S into the, leads of the INE-W960/INE-NAV-60/INE-W960S
View all Alpine INE-W960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
5 Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle's chassis. Connect all the leads of the INE-W960/INE-NAV-60/INE-W960S according to details described in the "Connections" (page 92). Hex Nut (M5) Screw Installation example using the Original Mounting Bracket 1 Mount the original mounting bracket to the unit using the supplied screws. Screws (M5 x 8) (Included) Ground Lead* *2 Bolt Stud Metal Mounting Strap *1 Chassis Ground Lead Chassis This unit • For the screw marked "*2," use an appropriate screw for the chosen mounting location. 6 Slide the INE-W960/INE-NAV-60/INE-W960S into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Removal 1. Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve. This unit Original Mounting Bracket 2 Connect all other leads of the unit according to details described in the "Connections" (page 92). 3 Mounting the unit in a car. * To securely connect the ground lead, use an already installed screw on a metal part of the vehicle (marked ( )) or a clean, bare metal spot on the vehicle's chassis. • Fix the cables carefully. Do not damage them by tucking them into movable parts, such as a seat rail, or by locating them against sharp or pointed edges. Bracket keys (Included) 2. Pull the unit out, keeping it unlocked as you do so. 90-EN