Alpine INE-W977HD Owners Manual - Page 108

Press OK to Continue, Replay Memory Near Full

Page 108 highlights

Bluetooth Please connect a Bluetooth audio device. • The Bluetooth audio device was not connected correctly. - Check the settings for the unit and the Bluetooth audio device and reconnect. Unable to download phonebook. • Phonebook failed to read due to mobile phone disconnection, etc. - Check the mobile phone connection, and then conduct synchronizing and adding again. (See page 85) • The connected mobile phone does not support synchronizing of its phone book. - Connect the mobile phone that supports synchronizing the phone book, then synchronize again. (See page 85) HDMI HDMI communication error, Please check your device and try again. • Communication error. - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the HDMI and the unit, using the HDMI cable. - Check the display by reconnecting between the HDMI device and the unit. HDMI current error, Please reconnect your device and try again. • Abnormal current is run to the HDMI connector device. - Turn the ignition key off, and then set to ON again. - Disconnect the HDMI device from the unit, and then reconnect it. HDMI monitor communication error. Please check the connection or restart system. • HDMI device communication error. - Turn the engine (ACC) OFF/ON. Or, check the HDMI cable where it connects to the HDMI monitor. Too many monitors are connected to the HDMI output. Please check the connection. • More than 4 HDMI monitors are connected. • A cascade connection using more than 2 distributors is made. - Use one distributor and less than 4 HDMI monitors when connecting. iDataLink CAN Communication error • Communication error. - Check the iDataLink module connection. SiriusXM Check Tuner • The SiriusXM Tuner is disconnected or the unit is having trouble communicating with the Tuner. - Connect the Tuner or check the Tuner connection to the back of the unit. Check Antenna • The SiriusXM Satellite Radio antenna or cable is either damaged or not connected correctly to the SiriusXM Tuner. - Check that the SiriusXM antenna cable is connected to the SiriusXM Tuner and check that the antenna cable is not kinked or otherwise damaged. Replace the antenna if necessary. - SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com. No Signal • The SiriusXM satellite signal is too weak at the current location. - Move the vehicle to a location with a clear view of the southern sky. - Make sure the Satellite Radio antenna is properly mounted and not obstructed by metal objects. Channel Not Subscribed Call SiriusXM to Subscribe • The active channel has become unsubscribed or the requested channel is not available in your subscription package. - In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription package or would like to subscribe to this channel. In Canada, visit www.siriusxm.ca or call 1-877-438-9677. - The unit will revert to the previously selected channel or to channel 1 automatically. Channel Not Available • The active channel is no longer in the SiriusXM channel lineup or the user has entered an invalid channel number. - Visit www.siriusxm.com for information on the current channel lineup. • The unit will revert to the previous channel or to channel 1 automatically. Subscription Updated Press OK to Continue • Your subscription has been updated. - Touch [OK] to clear this message. Channel Locked • A locked channel is selected. - Input the passcode on the number keypad screen, see "Parental Lock Function" (page 70). If wrong passcode is entered, "Incorrect Pass Code entered" will be displayed and the unit will revert to the previous channel. Updating The Featured Favorites channels are currently updating. Updating Teams, please wait • The Game table is currently updating. Replay Memory Full • Replay Buffer is full. Replay Memory Near Full • Replay Buffer will be full within 11 seconds. 108-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114

108
-EN
Bluetooth
Please connect a Bluetooth audio device.
The Bluetooth audio device was not connected correctly.
-
Check the settings for the unit and the Bluetooth audio device
and reconnect.
Unable to download phonebook.
Phonebook failed to read due to mobile phone disconnection,
etc.
-
Check the mobile phone connection, and then conduct
synchronizing and adding again. (See page 85)
The connected mobile phone does not support synchronizing of
its phone book.
-
Connect the mobile phone that supports synchronizing the
phone book, then synchronize again. (See page 85)
HDMI
HDMI communication error,
Please check your device and try again.
Communication error.
-
Turn the ignition key off, and then set to ON again.
-
Check the display by reconnecting between the HDMI and the
unit, using the HDMI cable.
-
Check the display by reconnecting between the HDMI device
and the unit.
HDMI current error,
Please reconnect your device and try again.
Abnormal current is run to the HDMI connector device.
-
Turn the ignition key off, and then set to ON again.
-
Disconnect the HDMI device from the unit, and then
reconnect it.
HDMI monitor communication error.
Please check the connection or restart system.
HDMI device communication error.
-
Turn the engine (ACC) OFF/ON. Or, check the HDMI cable
where it connects to the HDMI monitor.
Too many monitors are connected to the HDMI output.
Please check the connection.
More than 4 HDMI monitors are connected.
A cascade connection using more than 2 distributors is made.
-
Use one distributor and less than 4 HDMI monitors when
connecting.
iDataLink
CAN Communication error
Communication error.
-
Check the iDataLink module connection.
SiriusXM
Check Tuner
The SiriusXM Tuner is disconnected or the unit is having trouble
communicating with the Tuner.
-
Connect the Tuner or check the Tuner connection to the back
of the unit.
Check Antenna
The SiriusXM Satellite Radio antenna or cable is either damaged
or not connected correctly to the SiriusXM Tuner.
-
Check that the SiriusXM antenna cable is connected to the
SiriusXM Tuner and check that the antenna cable is not kinked
or otherwise damaged. Replace the antenna if necessary.
-
SiriusXM products are available at your local car audio retailer
or online at www.shop.siriusxm.com.
No Signal
The SiriusXM satellite signal is too weak at the current location.
-
Move the vehicle to a location with a clear view of the southern
sky.
-
Make sure the Satellite Radio antenna is properly mounted and
not obstructed by metal objects.
Channel <xxx> Not Subscribed
Call SiriusXM to Subscribe
The active channel has become unsubscribed or the requested
channel is not available in your subscription package.
-
In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if
you have questions about your subscription package or would
like to subscribe to this channel. In Canada, visit
www.siriusxm.ca or call 1-877-438-9677.
-
The unit will revert to the previously selected channel or to
channel 1 automatically.
Channel <xxx> Not Available
The active channel is no longer in the SiriusXM channel lineup
or the user has entered an invalid channel number.
-
Visit www.siriusxm.com for information on the current
channel lineup.
The unit will revert to the previous channel or to channel 1
automatically.
Subscription Updated
Press OK to Continue
Your subscription has been updated.
-
Touch [OK] to clear this message.
Channel <xxx> Locked
A locked channel is selected.
-
Input the passcode on the number keypad screen, see “Parental
Lock Function” (page 70). If wrong passcode is entered,
“Incorrect Pass Code entered” will be displayed and the unit
will revert to the previous channel.
Updating · · ·
The Featured Favorites channels are currently updating.
Updating Teams, please wait
The Game table is currently updating.
Replay Memory Full
Replay Buffer is full.
Replay Memory Near Full
Replay Buffer will be full within 11 seconds.