Alpine IVA W200 Owners Manual - Page 14

Displaying the Numeric Keypad Input Screen The numeric keypad input screen is displayed when the DVD mode is selected for searching a title or chapter. It can also be used for entering a country code or password for DVD setup, and for selecting a channel number in the SAT Radio mode. 1 Touch [10KEY] on the main source screen. 2 Touch the desired numeric key. Display example for numeric keypad Radio Display example for FM Radio main screen Operation buttons of this area can be used while displaying the numeric keypad input screen. Input screen area Closes numeric keypad input screen All input numbers will be deleted Previous number will be deleted Input number is confirmed Numeric keypad The numeric keypad input screen closes when the area is touched while displayed. 3 Touch [ENT] to confirm your entry. [SOURCE] button: Refer to page 10 [VISUAL] button: Displays the VISUAL selection screen [SETUP] button: Displays the SETUP selection screen [ ] button: Refer to page 11 (Displayed when an image source or external audio processor is connected.) Displays the preset number/frequency. This unit cannot receive HD Radio™ signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the AiNET bus. Listening to the Radio 1 Touch [SOURCE] on the main source screen. The source selection screen is displayed. Receiving Analog Radio: 2 Touch [RADIO]. The radio mode is activated and the display changes to the Radio Mode screen. Receiving HD Radio (if TUA-T500HD is connected): 2 Touch [HD RADIO]. The digital radio mode is activated and the display changes to the HD Radio Tuner Mode screen. 3 Touch [BAND] to select the desired radio band. Each press changes the bands as follows: FM-1 FM-2 AM FM-1 12-EN