Alpine IVA W200 Owners Manual - Page 15
Changing the Display HD Radio mode - frequency
UPC - 793276200532
View all Alpine IVA W200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4 Touch [TUNE] to choose the tuning mode. Each touch changes the tuning mode display. Distance Local Manual Distance • There are two modes you can select for auto tuning, DX and Local: - DX (Distance) mode (with DX SEEK indicator ON); Both strong and weak stations will be tuned in. - Local mode (with SEEK indicator ON); Only strong stations will be tuned in. The initial setting is DX. 5 Touch [ ], [ ] or [ ], [ ] to change the radio frequency up or down respectively. In manual mode, touch and hold to change the frequency continuously. • "DIGITAL" is displayed when a digital radio station is received. Setting Analog Mode (HD Radio mode only) While receiving HD radio, you can switch to analog signal mode, even in areas that receive digital radio station signals. 1 Touch [ANALOG] in HD Radio Tuner mode. Switches to analog mode, and the [ANALOG] button turns orange. Touch [ANALOG] again to cancel analog mode. Manual Storing of Station Presets 1 Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning. 2 Touch [P1/2] to change the function guide. 3 Touch and hold any one of the preset buttons [P.SET 1] through [P.SET 6] for at least 2 seconds. The selected station is stored. 4 Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the band desired and repeat the procedure. A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 or AM). • If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized. Automatic Memory of Station Presets The tuner can automatically seek and store 6 strong stations in the selected band in order of signal strength. After selecting the desired band, touch [A.MEMO]. The tuner automatically seeks and stores 6 strong stations into [P.SET 1] to [P.SET 6] in order of signal strength. When the automatic storing has been completed, the tuner goes to the station stored in [P.SET 1]. • If no stations are stored, the tuner will return to the original station you were listening to before the automatic storing procedure began. Tuning to Preset Stations You can tune in the preset stations in memory on each band using the preset number. 1 After selecting the desired band, touch [P1/2] to change the function guide. 2 Touch any one of the preset buttons [P.SET 1] through [P.SET 6] that has a station stored to it. The preset station is received. Changing the Display (HD Radio mode only) Text information, such as Station name, Song title, Artist, etc., is displayed while receiving a digital radio station. 1 Touch [INFO.] on the HD Radio Tuner mode main screen. Each time you touch this button, the display changes as shown below. Short Station Name *1 Song title *2 Artist *2 Album *2 Long Station Name *1 *1 Displays Short Station Name / Long Station Name in the Station Information Service Data. *2 Displays Song title / Artist / Album in the main program Service Data. 13-EN